What California health officials say
The California Department of Public Health has concluded that water damage, dampness, visible mold, or mold odor indoors is unhealthy. Its advice is to fix the moisture and remove the mold quickly and safely.
Since 2016, California’s housing code has also listed visible mold as a substandard housing condition.
Do you need a mold test?
Usually not. The state health department says testing is not a reliable way to predict health risk. If you can see mold or smell it, you already know enough to act.
That saves you money. Spend it on removal and on fixing the leak.
Signs of mold after water damage
- A musty, earthy smell that does not go away
- Dark or fuzzy spots on walls, ceilings, or baseboards
- Peeling paint or bubbling wallpaper
- A past leak that was never professionally dried
DIY or professional?
Size is the usual guide.
| Mold area | Guidance |
|---|---|
| Under 10 square feet | A homeowner can usually handle it with protective gear |
| 10 to 100 square feet | A judgment call based on location and health concerns |
| Over 100 square feet | May require an experienced professional contractor |
Call a professional at any size if sewage caused the damage, or if mold is inside your air system.
Our mold remediation process
- Inspection. We find the mold and the moisture feeding it.
- Containment. Plastic barriers and negative air pressure keep spores out of clean rooms.
- Air filtration. HEPA filters capture airborne spores during the work.
- Removal. Moldy drywall, carpet, and other porous materials are bagged and removed.
- Cleaning. Remaining surfaces are HEPA vacuumed and wiped down.
- Drying. The area is dried to normal moisture levels.
- Repair. New materials go in once everything is clean and dry.
How to keep mold from returning
- Fix leaks as soon as you find them.
- Dry wet materials within 24 to 48 hours.
- Run bathroom and kitchen exhaust fans.
- Keep indoor humidity low, ideally under 60 percent.